• Combining Sensor Data with Predictive CFD Modeling 
• Predicting Cooling Unit Failure Mode Conditions
• Improving Existing Data Center Design
  Review of data center in government that is in need of improvements. Strategies for improving efficiency and lowering operating cost.
• Modernizing Existing Data Centers
  This webinar is wtih LeDesign and focuses on the modernization effort of a recent data center project where CoolSim was used to model the before and after conditions.
• Predicting the Energy Consumption in the Data Center
  Webinar with CRB of Boston describing techniques for modeling data center cooling energy consumption using bin data and CFD models made in CoolSim
• Modeling a Ducted Supply Data Center
  Webinar presented on 9/27/2012
• Improving the Energy Efficiency in The Data Center
• Lower Data Center Operating Costs Through Improved Design
• Optimizing the Energy Envelope of the Data Center
• Using CFD Modeling to Reduce Energy Costs in Data Centers
  Optimization of DX based downflow perimeter cooling system using VFD, cold aisle containment, and newer CRAC units.
• Modeling Cooling System Performance and Energy Consumption
  In this webinar we build a CoolSim model of an existing data center, validate it against measurements, and predict the energy consumption within 10% of measured. Then the model is modified to improve the energy efficiency and predict the annual savings.
• Reducing Energy Consumption in a Colo Data Center
  Reducing the amount of energy required for cooling a colo data center can significantly reduce operational costs. Using CoolSim, users can accurately predict the impact and ROI of energy saving techniques.
• Reducing the Energy Consumption of Data Center Cooling Systems
  Energy and Airflow Modeling of data center in major US healthcare facility. Modeled various scenarios to determine optimal design
• Improving Data Center Efficiency using a Ceiling Plenum
  Webinar conducted with FEA Associates to model a modification to an existing "room return" data center by added a ducted ceiling "hot aisle" plenum.
• Improving Data Center PUE Through Improved Airflow Management
  Hard copy presentation delivered during the webinar on 4/22/2010
• Migrating from Perimeter Underfloor Cooling to High Density InRow
  Overview of a consulting project at UNH using InRow cooling to replace perimeter downflow units.
• Validating CoolSim Simulation Output Data in an Existing Data Center
• Modeling Cooling System Failures with CoolSim
  A review of "2N" and "N+1" redundancy is reviewed and CoolSim is used to study a data center to determine the cooling failure mode condition.
• Modeling the Thermal Environment of a Large Data Center
  In this Webinar we modeled a large 56k sq ft data center at Delta Airlines to determine optimal energy savings methods. Analysis includes turning off CRAH's, adding VFD's, and the addition of a Waterside Enconomzer.
• The Benefit of Adding a Ceiling Plenum to an Existing Data Center
  Webinar Archive from 7/28/2011 Broadcast. In this webinar we look at the option of adding a ceiling plenum to an existing data center. Parameters such as RTI, RCI, PUE, and overall annual data center operating costs are used to optimize the design.
• Modeling In-Row and Supplemental Cooling Designs with CoolSim
  Modeled the application of APC In-Row cooling units to existing data center.
• Reducing Data Center PUE using Coolsim
   

A review of what constitutes the PUE value and how to lower overall PUE using CoolSim as a guide.